Which soil, which equipment?
Selection guideAlmost any type of soil sets its own demands on the model of auger to be applied. In homogeneous soils one auger type is usually sufficient; in heterogeneous (layered) soils several auger types are used and the operator switches between them while drilling. The guide below is based on the field experience documented in manufacturer catalogues.
Choosing an auger by soil type
Clay is very cohesive, so the blades can be narrow and meet little resistance; the sample is taken almost undisturbed.
Sandy soilsEdelman auger, sand typeSand is not cohesive; broad blades keep the sample inside the auger.
Coarse / very dry sandEdelman auger, coarse sand typeFor soils with little or no cohesion the blades are extended with extra wings, forming an almost closed auger.
Sand–clay mixEdelman auger, combination typeGets a good hold of sandy material, while clayey material is easily removed from the auger body.
For hard, stiff soils mixed with fine gravel, above and below the groundwater level. Sharp, downward-angled bits.
Used where the Riverside auger does not yield adequate results in coarse gravel; heavy forged steel body.
Edelman auger with an extended body, suitable only for very soft soils (sensitive to torsion).
Sampling of more or less soft, cohesive layers with minimal disturbance; rapid soil profiling.
Only below the water table in moderately cohesive soils; almost undisturbed samples of 50–200 cm.
Connection type and handle
A very fast coupling with little weight; considered the standard connection. A slight disadvantage is that it is not free of play.
Male and female threads tightened with spanners create a rigid construction; for hard soils and hammering.
Extended T-handle and ratchet keep the wrist in a neutral position; no full turns needed, works clockwise and anti-clockwise, less torque required.
Placed between the handle and the auger bottom part when the depth cannot be reached with a single or bi-partite auger.
Depth by method
| Method | Typical depth | When? |
|---|---|---|
| Hand auger | 5 m · up to 8–10 m | General soil research, profile description, environmental sampling. 5 m with the standard and ergonomic sets; 8–10 m realistically achievable with extensions. → Ergonomic auger set |
| Gouge auger | 1 m · up to 5 m | Rapid soil profiling; single gouge sets to 1 m, extendable bi-partite sets to 5 m. Smaller diameters in fine/dense soils, larger in loose soils. → Gouge auger sets |
| Percussion drilling | 5–10 m | Hard soils with rubble, bricks and stones; city centres and industrial sites. Step-wise sampling avoids contamination; no lubricants used. → Percussion drilling set (Cobra TT) |
| Soil column | 1 m | Almost undisturbed soil columns of ~1 m without digging a profile pit; soil structure and root research. → Soil column cylinder auger set |
The maximum depth strongly depends on the groundwater level, the soil profile and the characteristics of the material to be penetrated.
Sample type: choose by analysis
Hand Augers 1 product
View All →Karot & Sediment Sampling 3 products
View All →Soil Sample Rings & Moisture 3 products
View All →
07.53.SE100 cm³ ring volume for dry density and porosity determination
07.53.SCCompact ring set for agricultural and environmental engineering applications
19.21Suction-free soil solution sampling for contamination and nutrient analysis
Sludge & Sediment Samplers 3 products
Soil Testing 6 products

Compliant with ASTM D3385-03 / DIN 19682, for triple simultaneous water infiltration measurement.

Measures relative soil erosion susceptibility using standardized artificial rainfall.

Rugged soil moisture sensor measuring moisture, temperature and salinity.

Rugged soil sensor measuring moisture and temperature for long-term monitoring.
06.02Field instrument recording penetration resistance on an analog chart strip
PLG-PROBluetooth-connected digital penetrologger, IP67, with STIP-H sensor head
Other Products 9 products

Contact us for technical details and a quote.

Contact us for technical details and a quote.

Contact us for technical details and a quote.

Contact us for technical details and a quote.

Contact us for technical details and a quote.

Precise shear testing on very thin soil layers (e.g. soil crust)

Contact us for technical details and a quote.

Contact us for technical details and a quote.

Contact us for technical details and a quote.






